Inpa Ncs Expert English

NCS Expert 4.0.1 and EDIABAS 7.3.0.5 English with v53.5 Coding Files Installed Win 105 MB BMW Standard Tools - a set of utilities. EDIABAS - WINKFP - NFS - INPA - NCS Expert Homepage - Code: http. Aug 02, 2019 Download NCS Dummy and extract the contents of the downloaded archive to a local folder on your hard disk. Inpa 5.0.6 (with English script files) - EDIABAS 7.3.0 - NCS Expert 4.0.1 (with English menus and buttons, and NCS Dummy Profile) - NCS Dummy 0.6.0.4 - Tools32 4.0.3 - WinKFP 5.3.1 - BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files) - Integrated SP-DATEN v53.3.

BMW Standard Tools is the software suite distributed by BMW Group that contains several interoperating applications and drivers, including NCS Expert, WinKFP, NFS, INPA, Tool32, and others. Here is the free download link for V2.12.
Expert
Hardware:
A PC (Operating system: Win XP 32 bit /VMware Win 7 32 or 64 bit)
An INPA/EDIABAS K+DCAN USB Diagnostic cable (cheap €19 in eobdtool.co.uk)
How to set up BMW Standard Tools 2.12?
Step 1: Download BMW Standard Tools 2.12
Download here and install follow system prompts:
Step 2: Download and install INPA
http://www.maxdown.org/download.php?file=BMW%20Inpa/Ediabas%20v5.06&host=b
Step 3: Download and install NCS Expert ENG
Make sure your EDIABAS should already be configured to STD:OBD for use with INPA
cable. Download EDIABAS configurator here:
This tool (in C:EDIABASEdiabas-Konfiguratorfolder) allows
you to easily change the ediabas.ini to your desired interface. So if you are
switching from INPA to E-Sys you could use this to switch from STD: OBD to ENET.
Set COM port for INPA cable
Connect the INPA DCAN cable with PC Install device driver Come to My Computer>>Device Manager>>Ports (COM&LPT)
In this case, it’s COM5. We need to change this in the obd.ini file located
in the c:ediabasbin folder.
Right-click on your INPA cable driver for example mine is labeled “USB Serial Port” and click on properties. Now in the property window click on the advanced tab.
Now every driver is different but the important part is the settings such as latency timer and received and transmit bytes. See pic below for the ideal settings. You may also change the COM port number here as well for tutorial I left it at 5. Once your changes are done we can proceed by clicking OK to accept the changes. No close all windows to return to the desktop.
Browse to C:EDIABASBIN and find file obd.ini and
open it with an editor (e.g Notepad)
The First 3 lines will look like this…
[OBD]
Port=Com1
Hardware=USB
Need to change the Port to reflect our INPA cable which in our case
is COM port 5. So change it to look like this…
[OBD]
Port=Com5
Hardware=USB
NOTE: Remember which USB port you connected your cable to as plugging it into a different USB port will allocate the INPA cable to a different COM port and neither tool will see the cable until the original USB port is used again or changed in device manager and obd.ini as mentioned above. Now to test if your cable installed correctly. Plug it into the vehicle’s OBD port and open
INPA.
Step 6: SPDATEN Files
Download and install SPDaten files (always recommend the latest) in this case it is 50.2 until I finish zipping and upload SPDatens 51.0 and upload it to share. (Follow the instructions provided at the end of the blog labeled “How to start WinKFP” which will explain how to import the SPDaten files to WinKFP)
Once downloaded you can now
**EDITED 10-12-2013**
For NCSExpert to install or update the data files, copy the files from SP-daten-E##daten to
the C:NCSEXPERDATENE## (where E## is whatever chassis you’re
updating). You will also want to copy the files from SP-daten-E##SGDAT to C:NCSEXPERSGDAT (they’re not separated into different chassis in NCS Expert, so you just want to copy and paste everything to that directory. Overwrite everything it asks about). Then copy the files from SP-daten-E##ECU to C:EDIABASECU
After copying the data files to
c:NCSEXPERDATENE## copy the following files to the following locations:
copy C:NCSEXPERDATENE##*.000
C:NCSEXPERDATEN
copy C:NCSEXPERDATENE##*.DAT C:NCSEXPERDATEN
copy C:NCSEXPERDATENE##*.ASC C:NCSEXPERDATEN
2. After installation, the directory (Drive letter):EC-APPSNFSSGDAT contains file CABI.h only and doesn’t contain files, required for working.
3. Mount the Progman disk in virtual drive (or insert in usual DVD-drive), extract all files SP-daten-Exx.rar from directory (Drive letter):CIP-Installerbin, each one in its own directory.
(You must get directories like SP-daten-Exx)
4. Now copy all *.IPO files from every directory (Drive letter):SP-daten-Exxsgdat to directory (Drive letter):EC-APPSNFSSGDAT.
For this purpose better use Total Commander, it allows overwriting elder files
with newest. This directory now looks like this:
5. In the same way refresh directory (Drive letter):EDIABASEcu with files taken from (Drive letter):SP-daten-Exxecu 6.
Run WinKFP
7. Choose “Import/Export – Import – Assemly line data” and import all data needed from directories (Drive letter):SD-daten-ExxDATA Details how to import assembly line data are given
in official manual for WinKFP
8. After importing the data, copy all files from directory (Drive letter):SD datenE70DATAgdaten to directory (Drive letter):EC-APPSNFSDATAGDATEN, overwriting all existing files.
Note: If you use Progman v.30 for updating WinKFP, it has error in file GDATENSgidc.as2. Simply open this file with Notepad and delete line 165.
WinKFP is ready for programming
ICOM for BMW ISIS ISID A+B+CPlus V2014.06 External HDD Support Multi-language
2.
3.
(Out of stock)BMW Scanner 1.4.0V Programmer Never Locked
4.
BMW INPA K+CAN USB Interface PC Based BMW Diagnostic Tool

Related Post:

How-to: install BMW INPA 5.0.6 software on Windows 7 or Windows 8 32 bit or 64 bit to get it to work with a K+DCAN cable.

Software version: INPA 5.0.6

Operation system:

Windows 7 32 or 64 bit

Windows 8 32 or 64 bit

Installation tips and guides:

STEP 1: INSTALLING BMW STANDARD TOOLS

STEP 2: INSTALLING INPA

STEP 3: INSTALLING NCSEXPERT IN ENGLISH

Bmw Ncs Expert Tool

STEP 4: INSTALLING & CONFIGURATING DCAN INPA CABLE

STEP 5: CHANGING THE OBD.INI

STEP 6: SPDATEN FILES

In detail…

STEP 1: INSTALLING BMW STANDARD TOOLS

Download and install BST 212

Since BST (BMW Standard Tools) was designed for Win XP 32bit operating

Systems, users have faced issues with tools like WinKFP and NCSExpert since Win

7 64bit systems have been introduced. Running in XP compatibility mode just

wasn’t enough. Presenting you with several errors or not running at all. Only

solution was to install on a XP system or like me… XP VMware. Well that all

changed with BST 2.12 which works on 32 or 64bit systems.

WIN 7/8, 32/64bit OS

STEP 2: INSTALLING INPA software

(will need it after coding certain modules such as DME for CAS

1961 corvette soft top installation. or EWS Alignment)

Download and install my version of INPA 5.06 with Fxx Support by simply

replacing the existing folders with the folders provided in the

Replace C:EC-AppsINPA

Replace C:EDIABAS

STEP 3: INSTALLING NCSEXPERT IN ENGLISH

Download and install NCSEXPER32_ENG.zip

Copy and replace contents in the .zip file with contents in C:NCSEXPERBIN. Now

NSCExpert is in English but you will find the Hot Keys do not work. This is a bug a

fellow MHH member discovered and haven’t really worked on trying to fix it so for

the time being just click on the F# key with your mouse.

Not done yet with NCSExpert. Need to import profiles to NCSExpert. How? well

download the PFL.zip and copy and replace all contents from PFL.zip

to [b]C:NCSExpertPFL. (you will also find a lot more PFL’s by searching for

NCSExpert profiles in Google)

Now you have a working WinKFP and NCSExpert with profiles loaded on your PC

we can continue to Step 4.

STEP 4: INSTALLING & CONFIGURATING DCAN INPA CABLE

Configure your DCAN/INPA cable. If you followed my steps correctly than your

EDIABAS should already be configured to STD:OBD for use with the INPA cable. If

not you can download ediabas-konfigurator from here if it is not already in

your C:EDIABASEdiabas-Konfigurator folder. This tool allows you to easily

change the ediabas.ini to your desired interface. So if you are switching

from INPA to E-Sys you could use this to switch from STD:OBD to ENET.

Now to set your COM Port we must first find which COM port is being used for

your cable.

Connect your cable to your PC (some may require a 12v supply to power the

cable)

Allow the device drivers to install (for best driver use the driver that came with

your cable. If not then let windows install the best suitable driver for it)

Navigate to Control Panel, Device Manager, and scroll to Ports (COM & LPT)…look at the pic

So in my case it’s COM5. So we need to change this in the obd.ini file located in

the c:ediabasbin folder. But first lets make some changes to the cable.

Right click on your INPA cable driver for example mine is labelled “USB Serial

Port” and click on properties. Now in the property window click on the advanced

tab.

Now every driver is different but the important part is the settings such as latency

timer and received and transmit bytes. See pic bellow for the ideal settings. You

may also change the COM port number here as well for tutorial I left it at 5. Once

your changes are done we can proceed by clicking OK to accept the changes. No

close all windows to return to the desktop.

STEP 5: CHANGING THE OBD.INI

Navigate to C:EDIABASBIN and find file obd.ini and open it with an editor such

as notepad.

First 3 lines will look like this…

[OBD]

Port=Com1

Hardware=USB

So we need to change the Port to reflect our INPA cable which in our case is COM

port 5. So change it to look like this…

[OBD]

Port=Com5

Hardware=USB

Inpa Ncs Expert English Dictionary

When done click File -> Save and exit out.

Very important to remember which USB port you connected your cable to as

plugging it into a different USB port will allocate the INPA cable to a different

COM port and neither tool will see the cable until the original USB port is used

again or changed in device manager and obd.ini as mentioned above.

Now to test if your cable installed correctly. Plug it into the vehicle’s OBD port and

open INPA. You should look like this…

If not follow the above steps again and correct your error.

Ncs Expert Torrent

STEP 6: SPDATEN FILES

Download and install SPDaten files of your choice (always recommend the latest)

in this case it is 51.2. Once downloaded you can now follow the instructions

provided bellow labelled “How_to_start_WinKFP.pdf” this will explain how to

import the SPDaten files to WinKFP.

Edit to update:

For NCSExpert to install or update the daten files, copy the files from SP-daten-

E##daten to the C:NCSEXPERDATENE## (where E## is whatever chassis

you’re updating). You will also want to copy the files from SP-daten-

E##SGDAT to C:NCSEXPERSGDAT (they’re not separated into different chassis

in NCS Expert, so you just want to copy and paste everything to that directory.

Overwrite everything it asks about). Then copy the files from SP-daten-E##ECU

to C:EDIABASECU

After copying the daten files to c:NCSEXPERDATENE## copy the following files Divinity original sin 2 custom vs origin.

to the following locations:

copy C:NCSEXPERDATENE##*.000 C:NCSEXPERDATEN

copy C:NCSEXPERDATENE##*.DAT C:NCSEXPERDATEN

copy C:NCSEXPERDATENE##*.ASC C:NCSEXPERDATEN

Ncs Expert Tool

who like this article also viewed: